Close Menu
15X93 OC R13 INSULATION KRAFT FA
Owens Corning EcoTouch Insulation is soft to the touch, easy to cut and install. It delivers comfort helping homes stay cooler in the summer and warmer in the winter to reduce energy costs.
QUICKRETE PRONTO MIX 60LB
PRODUCT USE:QUIKRETE® PRONTO MIX is a construction grade mortar mix designed for laying brick, concrete masonry units and stone. QUIKRETE® PRONTO MIX is a pre-blended, sanded product. The standard formulation meets ASTM C 270 and C 1714 for Type N mortar. *YIELD : Each 80 lb (36.2 kg) bag of QUIKRETE® PRONTO MIX will lay up to 37 standard bricks or 13 standard(8 in x 8 in x 16 in [200 mm x 200 mm x 405 mm])blocks TECHNICAL DATA:APPLICABLE STANDARDS: ASTM International •ASTM C 270 Specification for Mortar for Unit Masonry•ASTM C 1714 Specification for Preblended Dry Mortar Mix for Unit Masonry *PHYSICAL/CHEMICAL PROPERTIES:QUIKRETE® PRONTO MIX meets or exceeds the property requirements of ASTM C 270 and ASTM C 1714 for the type selected. Refer to Appendix XI of ASTM C 270 for guidance in selecting the proper mortar type. INSTALLATION: *Apply a full bed of mortar onto the base, approximately1/2 in to 3/4 in (13 mm to 19 mm) thick•Push downward into the mortar bed and sideways against the previously laid block with a slight twisting motion•Tool the mortar joints when they become thumbprint hard. This will make the mortar joint watertight and provide a neat appearance *CURING:Curing of masonry mortars is required only if conditions are very hot, dry or windy. In such cases, a gentle mist of water applied to the surface will prevent premature drying and improve the strength of the mortar.PRECAUTIONS:Variations in mix water amount, mix time, curing conditions and finishing will cause color variations.
3/8 STEEL (SINGLE UNIT)
Featuring a ridged design, this 3/8 in. x 20 ft. Rebar offers optimal adhesion with concrete and is suited for reinforcing concrete. The grade 40 steel rebar is made to last.
Grade 40 steel rod for reinforcing concrete
Ridges for proper concrete adhesion
3/8 in. diameter
Cut to 20 ft. length
5/8 STEEL (SINGLE UNIT)
The 5/8 in. x 240 in. Rebar is made from ASTM A615 material for durability. The 40 grade rebar features a 60,000 psi minimum yield strength for flexible use.
Can be used in concrete for expansion and contraction reinforcement
purposes
Provides ideal mechanical anchoring with the ridged design
